- About Us
- Bearings
Vertical Bearings
- AV Series
AV
LV SeriesLV
MV SeriesMV
V SeriesV
Horizontal Bearings
- HD Series
HD
IH SeriesIH
Tilting Pad Bearings
Journal Bearings
- Journal Pad Units
Journal
Thrust Bearings
- SE Series
SE
Omega EqualisedOmega
OmegaOmega
Marine Bearings
- Marine Gearbox Internals
Marine
Marine Propulsion Motor
and Generator BearingsJobs at Michell Bearings
Showing 1 available job
Repair Operator
Michell Bearings
South Shields
Competitive
27th July 2025
The role
As a Repair Operator you will be part of the customer support repair team and will be responsible to ensure bearings are refurbished and assembled in accordance with quality procedures and customer requirements. What you'll be doing Set up and machine various bearing components e.g. journal pad set, journal bushes, journal and thrust collars, baffles etc on a variation of conventional machine tools Undertake fitting and bedding activities De-burr and identify components Strip down and survey bearings and associated equipment Ensure that all work is carried out efficiently and accurately recorded on the shop floor data collection system Demonstrate that planned inspections and tests have been completed with satisfactory results recorded and/or identified on the necessary paperwork, as defined by the operator process control (OPC) requirements Ensure that the correct drawing is used and the appropriate tooling or inspection equipment with the correct calibration status, are selected Cooperate with management and others to ensure the company complies with current legislation, health and safety codes of practice on safe working and environmental requirements Assist in ensuring that good housekeeping standards are maintained (5's system) Ensure quality standards are maintained throughout all activities of control Who we're looking for To apply, we ask that you are time served in a mechanical engineering discipline however If you held an HNC/HND qualification this would also be advantageous to this role! We are looking for someone who has knowledge of materials, in particular metals, and experience of using various national standards as well as knowledge of foundries, forges and fabrication shops. Experience of fitting and machining in the whitemetal industry, including applying and repairing whitemetal faced bearings would also be desirable. You will need to have the ability to read and interpret engineering drawings and specifications and also have the ability to develop an understanding of hydrodynamic bearing repair procedures. If you can demonstrate a positive, motivated and flexible approach to your work, combined with the ability to organise priorities and meet deadlines we would love to hear from you! This position will be on a full time, permanent basis, working 37 hours per week onsite. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Car scheme Competitive pay Enhanced pension Training & development 9-day fortnight shift pattern Employment is subject to a Baseline Personnel Security Standard (BPSS) check.
Jobs at British Engines Group
Showing 15 available jobs
Automation Electrical Fitter
CMP Products
Cramlington
13th July 2025
The role
We are looking for an Automation Electrical Fitter to install, wire, modify, and troubleshoot the electrical aspects of special purpose machines and bespoke equipment in line with design, safety, and quality standards. What you'll be doing Modification of existing machines and equipment. Fault finding and repairs to equipment during commissioning and as required after installation. Receipt, recording and control of purchased parts from suppliers. Ordering, receipt and control of stock parts and consumables e.g. cable, terminal strips, etc. Assist the commissioning of new and modified machinery to ensure correct functionality and performance. Support the delivery of projects to ensure that operational and production requirements are fulfilled and key milestones are achieved. Assist with maintenance training during machine handover. Contribute to discussions and brainstorming for proposals for new machines and modifications. Support maintenance with regard to fault finding and repair when required. Read and interpret electrical schematics, wiring diagrams, and layout drawings for machinery. Install and wire control panels, motors, sensors, HMIs, PLCs, and safety devices on bespoke and standard machinery. Undertake panel/build wiring, machine wiring, and integration with automation systems. Support the electrical commissioning of machinery, including dry and wet testing and I/O checks. Assist with the setup, calibration, and adjustment of equipment as required. Ensure all work is performed in line with company, legal, and industry safety standards (e.g., BS7671, PUWER, CE Marking/UKCA). Maintain accurate electrical documentation and as-built wiring diagrams. Participate in risk assessments and safety-related discussions. Provide technical input to the design team for future projects and feedback from commissioning and maintenance activities. Identify opportunities for cost and efficiency improvements. Ensure that stock parts and consumables are available when required Ensure that detail of all modifications is fed back to the design and commissioning engineers so drawings can be updated Ensure that all documentation supplied with purchased parts is stored so that it can be passed to the user on machine handover. Who we are looking for To apply we ask that you are a time-served and qualified electrician (NVQ Level 3 or equivalent in Electrical Installation / Engineering). You will have experience working with special purpose machinery within manufacturing, automation, or engineering environments. Practical experience with control panels, PLC wiring, HMIs, safety relays, and field instrumentation is essential. You must be positive, have a can-do attitude and communicate effectively across all levels internally and externally. You will be self-motivated, capable of working independently, taking initiative and well-organised. Good time management, adherence to safe working practices, and responsible environmental standards are required. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Competitive pay Enhanced pension Training & development
About CMP Products
British Engines Group company, CMP Products, is a leading designer, manufacturer and supplier of cable glands, cable cleats and cable accessories.
CMP manufactures its products from three facilities based in Cramlington, Northumberland, and has a global distribution network, supported by ten offices spread across six continents from Houston, USA, to Busan, South Korea.
Controls and Commissioning Engineer
CMP Products
Cramlington
13th July 2025
The role
We are looking for a Controls and Commissioning Engineer who will have technical responsibility for the design and development of the controls for machinery, equipment and processes that are produced or modified by the automation engineering department. What you'll be doing: Design the controls for manufacturing machines, assembly machines, robot cells and other equipment Produce electrical drawings and parts lists for machine control systems Produce safety matrix and safety assessments Write PLC software and program integrated equipment including HMIs, PCs, vision systems, servo drives, sensor, instrumentation etc Develop commissioning plans, testing methods and buy-off records with detailed activities and key milestones Commission the control systems for new machinery and modified machinery including safety checks, I/O checks, function checks and performance checks Support the delivery of projects to ensure that operational and production requirements are fulfilled and key milestones are achieved Provide engineering expertise for machine concepts and costing Develop control concepts and write control specifications and functional specifications Provide design concepts, new ideas and solutions for the control systems for new and existing production equipment Raise purchase requisitions for control equipment Compile the documentation for machines including controls input to the user manual Liaise with the project manager to enable the development of project plans with key milestones. Ensure that all machinery supplied or modified is safe and in accordance with EC and UK regulations, harmonised standards, GAMP guidance and CMP standards Develop the software and control systems for machines during commissioning in a structured and controlled way Ensure all software and design drawings are up to date and backups are to the latest revision Ensure all of the information required for the construction of a technical file is stored correctly. Ensure that all of the electrical and safety testing is completed and signed off before hand over of the machine Ensure that all machinery supplied is energy efficient and does not cause environmental issues Ensure that the controls aspects of projects are delivered on time and within budget Who we are looking for To apply we ask that you preferably hold a degree in Electrical Engineering, Mechatronics, Process Engineering, or a related field, or be a time-served apprentice with significant relevant experience. You will demonstrate a positive, can-do attitude and foster strong, effective communication both within your department and across the wider organisation and externally. Self-motivated and able to work independently, you are comfortable taking initiative. We are looking for someone who is organised and consistently applies safe working and good environmental practices. Strong time management skills ensure you can prioritise tasks and manage your workload efficiently. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Competitive pay Enhanced pension Training & development
About CMP Products
British Engines Group company, CMP Products, is a leading designer, manufacturer and supplier of cable glands, cable cleats and cable accessories.
CMP manufactures its products from three facilities based in Cramlington, Northumberland, and has a global distribution network, supported by ten offices spread across six continents from Houston, USA, to Busan, South Korea.
HSE Manager
Stephenson Gobin
Bishop Auckland
13th July 2025
The role
This role has the primary function to support the company's commitment to achieving excellence in health, safety, and environmental (HSE) standards and compliance with legislative requirements. The role will also proactively identify, plan, and implement initiatives that drive continuous and sustainable improvement in HSE performance. What you'll be doing: Advise and support those responsible for HSE activities to develop a culture of safety, environmental responsibility, and shared ownership throughout the company. Proactively review and develop the health and safety management system to ensure continued compliance with ISO 45001. Continuously monitor and maintain the ISO 14001 environmental management system. Ensure all company policies, procedures, and directives are consistently implemented and adhered to. Conduct regular reviews and audits of internal HSE policies and procedures to ensure they remain compliant, up to date, and effective. Support customer and third-party audits as required. Identify areas for HSE improvement by analysing current performance and implementing effective continuous improvement methods. Produce regular written reports on HSE performance, including progress against key performance indicators. Assist and support management in the investigation of accidents, incidents, and non-conformances, ensuring all events are properly reported. Support the implementation of corrective and preventative actions, ensuring lessons learned are communicated and incorporated in company policies and procedures. Design and coordinate training programmes and presentations to enhance HSE awareness and proficiency across the workforce. Actively participate in the planning and facilitation of meetings to review HSE performance and policies. Collaborate with management to engage employees, contractors, and visitors in safety initiatives, particularly those at greater risk, using an employee approach to eliminate unsafe behaviours. Provide timely, constructive feedback to employees on HSE performance, including leading or supporting regular toolbox talks. Arrange and deliver HSE inductions for new employees and onsite external contractors. Always work safely and in accordance with the company&©s Health and Safety Policy Who we are looking for You will have significant experience working in a busy manufacturing environment, with a proven track record in the management of hazardous substances (COSHH) and a deep understanding of machinery safety in line with PUWER 1998 requirements. A strong background in Health, Safety, and Environmental management systems is essential, along with substantial experience in environmental management$ûideally with IEMA membership. You must also have direct experience in internal auditing to ISO 45001 and/or ISO 14001 standards and hold relevant qualifications as either an internal or lead auditor. Excellent communication skills are vital, with the ability to present information clearly, make logical and timely decisions, and effectively influence and motivate others. You will be fully computer literate, confident using a range of software systems, and able to manage your time effectively while working independently and solving problems as they arise. Strong interpersonal and leadership skills are fundamental to success in this role. A NEBOSH or NCRQ Diploma is preferred or working towards achieving this qualification. Possession of a NEBOSH General Certificate is required. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Competitive pay Enhanced pension Training & development
About Stephenson Gobin
British Engines Group company, Stephenson Gobin, is a rapidly growing business specialising in the design and manufacture of electromagnetic solutions.
Stephenson Gobin operates from a manufacturing facility in Bishop Auckland, County Durham.
Cell Manager
BEL Engineering
Newcastle upon Tyne
Competitive
6th July 2025
The role
As a Cell Manager, you will provide effective supervision and leadership and manage the day to day operations of the allocated machining cell(s) here at BEL Engineering. What you'll be doing Lead, motivate and develop your team to achieve business goals, ensuring all work standards are met and aligned with company policies & procedures Effectively communicate and implement company policies, procedures and practices Drive the SQCDP (Safety, Quality, Cost, Delivery, People) culture throughout operations Implement and develop Standard Operating Procedures (SOP) Lead Weekly SQCDP Cell Meetings Proactively manage absence and performance management issues, including disciplinary procedures Ensure full compliance to all business standards (H&S, Quality and site performance) Ensure incidents/accidents are captured, reported and contained with corrective actions Support the Production Manager in delivering business objectives Provide guidance and feedback to team members, clearly setting expectations Identify poor performance and manage through performance improvement plans Ensure that the team&©s training and development needs are identified and met Promptly contain faults and put corrective actions in place Understand and drive OEE across the site Ensure constructive handover and capture of all issues is completed Practice and maintain 5S standards Ensure that you work in a safe manner and comply with the British Engines Group Health, Safety & Environmental Policy Who we're looking for To apply, we ask that you have experience working in a manufacturing environment in a management/supervisory role. You must understand 3 & 5 Axis CNC machines and their capabilities, a strong understanding of overall equipment effectiveness (OEE), experience of working in a subcontract manufacturing environment and manufacturing components for various industries (aerospace, oil and gas, nuclear, defence) is desirable. Excellent communication and people management skills are essential, as is the ability to thrive in a fast-paced environment with a focus on improvement. A proven leader, you will have the ability to develop your team through coaching and training. You will demonstrate a positive, innovative and motivated approach to your work combined with an ability to work under pressure within time constraints, building strong effective relationships across the business. An HNC or NVQ Level 4 in Engineering is essential or an apprenticeship certificate in a relevant engineering discipline. IOSH or NEBOSH qualifications would be advantageous. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Car scheme Competitive pay Enhanced pension Training & development Employment is subject to a Baseline Personnel Security Standard (BPSS) check and further vetting may be required.
About BEL Engineering
British Engines Group company, BEL Engineering, offers sub-contract machining services specialising in large capacity, heavy duty, horizontal machining.
BEL Engineering works primarily in the defence, nuclear, renewables and oil and gas sectors and operates from an advanced manufacturing facility based in Walker, Newcastle upon Tyne.
CNC Machinist
BEL Engineering
Newcastle upon Tyne
Competitive
20th July 2025
The role
As a Machining Centre Operative, you will have the responsibility to perform activities related with the operation duties associated with the setting and operating of CNC machines on the shop floor. You will achieve production requirements and maintain our approach to a high-quality standard. What you'll be doing Operate machines to required quality standards and in accordance with engineering drawings and specifications Work as part of the machine shop team and interface with production support, including production engineering, the maintenance department and the quality department Interpret engineering drawings and work with imperial and metric measures to ensure dimensional accuracy Programme machines to produce single, small batch or a series of components and finished products Work with a range of materials including exotic materials, nickel, super alloys, stainless steel, brass, duplex and aluminium Use a range of measuring equipment and have a working knowledge of inspection procedures in order to undertake self-inspection Ensure all work is carried out in accordance with the planned production requirements, and within the standard hours where applicable Ensure all work carried out is accurately recorded on the shop floor computer system Support the training of apprentices and trainees Ensure that you work in a safe manner and comply with the company's Health, Safety & Environmental Policy To carry out any other duties not listed above as may reasonably be expected Who we're looking for To apply, we ask that you are time served or possess other equivalent qualifications and have specific previous experience of CNC machining. We are specifically looking for Turners to join our team and balance out of skill sets within the business. We are looking for someone who can demonstrate a positive, innovative and motivated approach to their work, combined with the ability to work under pressure and within time constraints, along with the ability to organise priorities and meet deadlines. Strong communication and problem solving skills are essential, as is a good knowledge of production processes and systems. This is an opportunity to join a well-established, progressive business, where you can develop experience in an essential activity supporting our production facility. We are looking for someone who can demonstrate a positive approach to Health, Safety and Environment (HSE) through good working practices, housekeeping and correct use of PPE. The hours of work are 37 per week, working a shift pattern consisting of days and nights to be discussed further at interview. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Car scheme Competitive pay Enhanced pension Training & development Employment is subject to a Baseline Personnel Security Standard (BPSS) check.
About BEL Engineering
British Engines Group company, BEL Engineering, offers sub-contract machining services specialising in large capacity, heavy duty, horizontal machining.
BEL Engineering works primarily in the defence, nuclear, renewables and oil and gas sectors and operates from an advanced manufacturing facility based in Walker, Newcastle upon Tyne.
Operative
Stadium Export Services
Gateshead
6th July 2025
The role
We are seeking two highly flexible Operatives to join our team in Gateshead. The ideal candidates will be capable of performing a variety of tasks to ensure we consistently meet our safety, quality, and productivity targets. What you'll be doing Construct pallets, shipping crates, and cases using a variety of pneumatic nail guns Operate a range of woodworking machinery for offloading timber, such as auto crosscut saws, beam saws, vertical bandsaws, rip saws, and other woodworking machines Pack a variety of items into crates and cases using hand tools and power tools, including pneumatic nail guns Assist with the loading and unloading of shipping containers Work offsite at customer premises, when required, to pack items into crates and cases Regularly and repetitively lift and handle in-process sawn timber manually Contribute to general labouring and housekeeping responsibilities Who we're looking for To apply, ideally, you should have experience working in a busy manufacturing environment, preferably with skills in using woodworking machines and tools. Training will be provided if necessary We are looking for candidates who have an eye for detail, a can-do attitude, and are self-motivated and team-oriented. If this sounds like you, we would love to hear from you! This position will be on a full time, permanent basis, working 37 hours per week both onsite and offsite working as required. A current driving license is desirable and a fork lift truck and crane license would also be advantageous. Benefits Wellbeing app (Employee Assistance Program) Holiday buy & sell Car scheme Competitive pay Enhanced pension Training & development
About Stadium Export Services
British Engines Group company, Stadium Export Services, provides a full export service offering bespoke packing solutions and export logistics.
Based in Gateshead, Stadium offers design, packing and shipping team, which includes the manufacture of timber and plywood cases and crates used to transport products worldwide.
Michell Bearings
Waldridge Way,
Simonside East Industrial Park,
South Shields,
NE34 9PZ.Tel: +44 (0) 191 273 0291
Email: sales@michellbearings.com
Email: hrteam@britishengines.com
Email: recruitment@britishengines.com© Michell Bearings.
Registered Office Address: 11 Glasshouse Street, St Peter's, Newcastle upon Tyne. NE6 1BS. Company registered in England and Wales no. 9390648